Bambu Lab A1 mini
Bambu Lab A1 mini Price : 350
Bambu Lab A1 mini Combo Price : 580 JOD
- Full-auto Calibration
- Multi-Color Printing (Combo Version)
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 180*180*180 mm³ Build Volume
Bambu Lab
A1 mini Combo
Multi-Color Printing
Plug-N-Play
Active Flow Rate Compensation
Full Auto Calibration
Active Motor Noise Cancelling
High Speed Precision
Bambu Lab
A1 mini Combo
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
A1 mini Tech Specs
| Body | Build Volume(W*D*H) | 180*180*180 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm | |
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate |
| Max Build Plate Temperature | 80°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10000mm/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer | Not Recommended | |
| Sensors | Monitoring Camera | Low Framerate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg | |
Bambu Lab A1 mini Combo
More Information
| Printing Volume | 180 x 180 x 180 mm³ |
|---|---|
| Outer Dimensions | 347 x 315 x 365 mm³ |
| Max Speed of Toolhead | 500 mm/s |
| Max Acceleration of Toolhead | 10,000 mm/s2 |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| Nozzle diameter | 0.4mm (included) 0.2mm, 0.6mm and 0.8mm sizes add-ons available |
| Nozzle Flow Rate | 28 mm³/s |
| Max Nozzle Temperature | 300 °C |
| Max Bed Temperature | 100 °C |
| Chamber Temperature Control | Unsupported |
| Supported Filament Type | PLA, PETG, PET, PVA, TPU |
| Technology | Fused deposition modeling (FDM) |
| Live View Camera | Built In |
| Power connector | IEC C13 |
| Maximum power | 150 W |
| Methods of sending print instructions | Wifi , Flashmemory |
| Supported operating systems for direct commutation | Windows, MacOS |
| Memory card port | Micro SD |
| Feeder system | Direct drive |
| Number of nozzles | 1 |
| Bed Calibration Methods | fully-automatic Leveling process |
| Printing surface type | Dual-Sided Textured PEI Plate |
| Layer height | From 0.1 mm up to 0.3 mm |
| Gross Weight | 8.2 kg |
| Net Weight | 5.5 kg |
| Input Voltage | 100-240VAC / 50~60Hz |