Bambu Lab A1
Bambu Lab A1
As low as
JOD 530.00
- Full-auto Calibration
- Multi-Color Printing (Combo Version)
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
More Information
| Printing Volume | 256 x 256 x 256 mm³ |
|---|---|
| Outer Dimensions | 465 x 410 x 430 mm³ |
| Operating Space Dimensions | 465 x 460 x 430 mm³ |
| Max Speed of Toolhead | 500 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s2 |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| Nozzle diameter | 0.4mm (included) 0.2mm, 0.6mm and 0.8mm sizes add-ons available |
| Nozzle Flow Rate | 28 mm³/s |
| Max Nozzle Temperature | 300 ℃ |
| Max Bed Temperature | 100 ℃ |
| Chamber Temperature Control | Unsupported |
| Supported Filament Type | PLA, PETG, PET, TPU, PVA |
| Technology | Fused deposition modeling (FDM) |
| Live View Camera | Built In |
| Power connector | IEC C13 |
| Maximum power | 1000 W |
| Methods of sending print instructions | Wifi , Flashmemory |
| Supported operating systems for direct commutation | Windows, MacOS |
| Memory card port | Micro SD |
| Feeder system | Direct drive |
| Number of nozzles | 1 |
| Bed Calibration Methods | fully-automatic Leveling process |
| Printing surface type | Dual-Sided Textured PEI Plate |
| Layer height | From 0.1 mm up to 0.3 mm |
| Gross Weight | 13 Kg |
| Net Weight | 8.3 kg |
| Input Voltage | 100-240VAC / 50~60Hz |
| Printing Volume | 256 x 256 x 256 mm³ |
|---|---|
| Outer Dimensions | 465 x 410 x 430 mm³ |
| Operating Space Dimensions | 465 x 460 x 430 mm³ |
| Max Speed of Toolhead | 500 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s2 |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| Nozzle diameter | 0.4mm (included) 0.2mm, 0.6mm and 0.8mm sizes add-ons available |
| Nozzle Flow Rate | 28 mm³/s |
| Max Nozzle Temperature | 300 ℃ |
| Max Bed Temperature | 100 ℃ |
| Chamber Temperature Control | Unsupported |
| Supported Filament Type | PLA, PETG, PET, TPU, PVA |
| Technology | Fused deposition modeling (FDM) |
| Live View Camera | Built In |
| Power connector | IEC C13 |
| Maximum power | 1000 W |
| Methods of sending print instructions | Wifi , Flashmemory |
| Supported operating systems for direct commutation | Windows, MacOS |
| Memory card port | Micro SD |
| Feeder system | Direct drive |
| Number of nozzles | 1 |
| Bed Calibration Methods | fully-automatic Leveling process |
| Printing surface type | Dual-Sided Textured PEI Plate |
| Layer height | From 0.1 mm up to 0.3 mm |
| Gross Weight | 13 Kg |
| Net Weight | 8.3 kg |
| Input Voltage | 100-240VAC / 50~60Hz |